After more than 30 years working with lighting control devices we have different special versions of our standard devices and project orientated special developements for various demands available. If you need a special lighting system function, maybe we have the solution for it from earlier projects which is available in just a short time. The following are some examples with special functions:


CONTROL DEVICE WIREL2

This device is specially developed for logic control of lighting control device NT 42(E) for garage areas through a motion detector and gate-barrier, it can be used anywhere for retrieving different light values where motion detectors and other command givers are used to call 2 different light situations, for instance 80% if somebody is in, 10% if nobody is in.

Function: This device has 2 registration-inputs A+B (230V), both retrieve light value 1 (normally bright 80-90%) by activating. Input A serves for motion detectors and retrieves by activating light value 1 (bright), de-activating sets light value 2 (for instance 20%) after the motion detectors delay time. Input B serves for barrier detectors or similar and has an adjustable switch back delay time (ca. 1-15 min.). Activation of one of the inputs calls light value 1, value 2 is called only after all connected detectors have been de-activated (including delay time). Both inputs are locked against the other, so light value 2 will be retrieved only if both inputs are inactive and the delay time of B is over. That way it is secure that the light value 2 (low brightness) can only be called if no motion detector is active, as well as the delay time of the barrier detector/switch is over.

WIREL2
WIREL 2

CONTROL DEVICE NT 38/2 (E) with 2 PRESETS

Control BRIGHTER-DARKER-ON/OFF and 2 daylight-dependent automatic control presets, with logic function

Special version of the control device NT 38 (Functions: BRIGHTER-DARKER-ON/OFF-Constant Light Control) with 2 independent selectable constant light values.
Application: if rooms will be used differently, however corresponding presetted brightness should be kept constant.

NT38/2
NT 38/2

CONTROL DEVICE NT 42(E) with longer transfer time

Control BRIGHT-STOP-DARK-PRESET 1+2-ON/OFF

Functions: Normal NT 42 functions: BRIGHT-DARK-STOP-PRESET 1-PRESET 2-ON/OFF, however with longer transition times.
Three (3) variants are available: Transition time max. ca. 10 min., 30 min., 120 min.
Application: for instance artificial dawning for animal breeding, research laboratory, henhouse and similar.

NT42
NT 42

CONTROL DEVICE NT 42RL(E) with control-display through LED-Line

Control BRIGHT-STOP-DARK-PRESET 1+2-ON/OFF

Normal NT 42 functions, however indication of the actual brightness-value through a 10-step LED-Line on operation-tableau, matching tableau: FM 6RL